The Platinum Grill is made of Stainless Steel-304 which is rust resistant and great material for Outdoor use.

The Platinum Grill is made of durable and high-quality materials such as Stainless Steel 304, which makes it very easy to clean and maintain. Please refer to the Maintenance and Cleaning section of the Installation Guide for more information.

The Platinum Grill should be installed by a Licensed Gas Fitter, especially for the Natural Gas Version. Gas appliances can become hazardous if they are not installed properly. Before each cooking session users are required to ensure there is no gas leakage and the appliance is functioning soundly.

The Platinum Grill has a printed installation manual included in the packaging. Alternatively, you can access the installation manual on the NewAge Products website: https://newageproducts.com/support-hub/

When installed, operated, and maintained according to the instructions, NewAge provides a limited warranty for the product. Please read through the NewAge Warranty policy. In case of any additional questions or queries contact our Customer Service team at 1.877.306.8930.

Continue holding the safety valve button in a depressed position until the burner remains lit when released. Please refer to the Troubleshooting section of the Installation Guide for more information.

Check gas supply. Check if the main shut-off valve is open. Check if the supply hose is pinched. Please refer to the Troubleshooting section of the Installation Guide for more information.

If the burner produces yellow flames, the oxygen flow may be restricted because of spider webs or other debris. Please refer to the Troubleshooting section of the Installation Guide for more information.

The ceramic tiles may be overloaded with grease drippings and build-up that causes the Burner Ports to be clogged. Please refer to the Troubleshooting section of the Installation Guide for more information.

Infrared Burner only comes with 36 in. & 40 in. Platinum Grill.

The Platinum Dual Side Burner can be installed on Outdoor Classic & Signature Cabinets Series and NewAge Appliance Carts. The Platinum Dual Side Burner can also be installed on custom-built cabinets for which instructions are provided in the Installation Guide supplied with the appliance.

The Platinum Dual Side Burners are made of Stainless Steel-304 which is rust resistant and great material for Outdoor use.

The Platinum Dual Side Burner is made of durable and high-quality materials such as Stainless Steel 304, which make it very easy to clean and maintain. Please refer to the Maintenance and Cleaning section of the Installation Guide for more information.

The Platinum Dual Side burner should be installed by a Licensed Gas Fitter, especially for the Natural Gas Version. Gas appliances can become hazardous if they are not installed properly. Before each cooking session users are required to ensure there is no gas leakage and the appliance is functioning in a sound manner.

The Platinum Dual Side Burner has a printed installation manual included in the packaging. Alternatively, you can access the installation manual on the NewAge Products website: https://newageproducts.com/support-hub/

When installed, operated, and maintained according to the instructions, NewAge provides a limited warranty for the product. Please read through the NewAge Warranty policy. In case of any additional questions or queries contact our Customer Service team at 1.877.306.8930.

Check gas supply. Check if the main shut-off valve is open. Check if the supply hose is pinched. Please refer to the Troubleshooting section of the Installation Guide for more information.

If the burner produces yellow flames, the oxygen flow may be restricted because of spider webs or other debris. Please refer to the Troubleshooting section of the Installation Guide for more information.

The Signature Outdoor Kitchen can be installed on any leveled surface in the outdoor area of the house.

The Signature Outdoor Kitchen brings your indoor living space outside, allowing you to cook, eat and entertain from the comfort of your backyard. The best Outdoor Kitchens are as functional as an indoor kitchen, as welcoming as a living room, and as comfortable as a family room.

All the Signature Outdoor Kitchen cabinet frames are made of 18 Gauge 304 Stainless Steel to provide rust resistance.

The Signature Outdoor Kitchen Cabinets are made of durable and high-quality materials such as Stainless Steel 304, which makes them very easy to clean and maintain.

When it comes to installing your outdoor kitchen, take time to determine what you can accomplish by yourself, and when will you need to bring in a professional. If you are installing a simple Outdoor Kitchen with a propane-fueled grill and no water lines, you may be able to complete it by yourself. However, if your Outdoor Kitchen is more complex, and involves natural gas lines, electricity, or water, it's best to leave it to a professional that knows working codes, safety regulations, and associated costs.

The flat pack cabinets all have the printed installation manual included in the packaging. However, you can find a link to the master Signature Outdoor Kitchen installation guide as well as the other individual installation manuals by scanning the QR code in the one-pager included with your purchased items, or simply visit this link: https://newageproducts.com/support-hub/

When the Signature Outdoor Kitchen is installed, operated, and maintained according to the instructions, NewAge provides a limited warranty for the cabinets. Please read through the NewAge Warranty policy. In case of any additional questions or queries contact our Customer Service team at 1.877.306.8930.

Currently, customization of the cabinets is not available for Signature Outdoor Kitchen.

All the main storage and appliance cabinet frames are pre-assembled. However, the false frames and the corner cabinet frames are flat packed and need to be assembled by the customer.

Yes, the Signature Outdoor Kitchen is a modular cabinetry system and allows different set configurations to be created.

The patented design of the Signature Series cabinet frames provides a simple and strong structure for different cabinet frames. The frame assembling process is very easy due to the Snap-fit joints between parts along with extra fasteners for ultimate structural rigidity. Please refer to the installation manual for more information.

Yes, all Signature Outdoor Kitchen cabinets have premium soft closing hinges and drawer slides for all doors and drawers.

All materials used for fabricating the Signature Outdoor Kitchen are outdoor rated. Moreover, the sealing gaskets on doors and drawers can provide sealing by more than 90%. NewAge countertops are recommended to be installed by adding a silicon sealant during the assembling process. For more details, please refer to the installation manual.

Yes, all Signature Outdoor Kitchen cabinets have stainless steel height adjustable legs with Snap-fit toe kicks with an integrated channel to install LED strips.

The legs can be adjusted by 1.2".

No, the separate fiber cement panels are designed to be installed on the cabinet's side and back faces to close off the cabinet enclosure, and to provide the surface to install the finishing material like the NewAge natural stack stone.

The Signature Outdoor Kitchen cabinets have two main sizes for all the storage cabinets, sink cabinets, and false frame cabinets - 18" and 36", three sizes for the insert grill and pizza oven cabinets - 33",36", and 40", 28" for the Kamado grill cabinet, and 16" for the side burner cabinet.

The 18" and 36" 3 drawer cabinets as well as the 28" Kamado cabinet have to be fixed to the ground using the included anti-tipping bracket. Please refer to the installation instruction for more details.

The farmhouse sinks are included with both the 18" and 36" sink cabinets, but the top-mounting faucet needs to be purchased and installed separately. The NewAge faucets or any other top-mounting outdoor rated faucet can be installed on the Signature Outdoor sink cabinets.

Yes, the Signature Outdoor sinks come pre-drilled for a mono-faucet. If another type of faucet is preferred, a metal hole saw will be required. Please follow the specific instructions provided by the faucet supplier when installing your faucet.

NewAge Signature Outdoor sinks are made from 304-grade Stainless Steel and are corrosion resistant. However, rust stains may form over time if the sink is not properly maintained, caused by deposits from water or food. Scrubbing the stains with a mild cleanser or metal cleaner should solve this problem immediately. Be sure to clean in the same direction as the grain lines of the finish.

If you notice hard water spots on the surface of your sink, take the following steps to bring your sink back to its original condition. 1. Using a cleaning sponge rub gently in the direction of the grain. If the mark won't shift, it may be necessary to use a Stainless Steel cleaner, in which case apply the cleaner and rub gently. 2. After cleaning it is important to rinse the stainless steel with clean fresh water and buff it with a soft cloth. Remember to always rub with the grain, NEVER across as you will ruin the finish, and the steel can lose its shine. If you must use a scourer, use a plastic scrub pad with no metal content.

Yes, 304-grade Stainless Steel withstands extreme hot and cold temperatures, along with sudden temperature changes.

NewAge Signature Outdoor Kitchen sinks are cUPC certified, meeting US and Canadian plumbing requirements.

When the product is installed, operated, and maintained according to the instructions, NewAge provides a Limited Lifetime Warranty to replace the defective product or parts if the part fails as a result of defective materials or workmanship. Please read the NewAge warranty policy and if you have any additional inquiries or questions, contact NewAge Products Customer Service at 1.877.306.8930.

We do not recommend altering the sink in any way including drilling extra holes, it would compromise the structural integrity of the sink, and doing so would void the warranty.

To prevent water spots & clouding, rinse and wipe the inside of the sink with a microfiber cleaning cloth after every use. For more thorough cleaning, use water and a mild liquid soap detergent (ammonia-free). Apply the cleaner with a soft sponge, then rinse with lukewarm water and pat dry with a microfiber cleaning cloth. Do not use cleaners containing any abrasive powders, bleach, ammonia, alcohol, or chlorine nor also abrasive pads, steel wool, or wire brushes when cleaning the sink. Using these will damage or wear down the sink surface.

Yes, Signature Outdoor Kitchen offers three different filler bracket kits for 33", 36", and 40" Signature grill cabinets which are designed to make the cabinets compatible with potential 3rd party grills. Please also see the Installation Manual of the 3rd party grill to confirm if there are any particular requirements for the cabinet or enclosure.

No, the Signature corner cabinets do not have any doors, but the space inside can be accessible through the cabinets next to them since there is no divider panel in between.

The 18" and 36" false frame cabinets are designed to provide the space to install the fiber cement panels on the front face of the cabinet and to apply the finishing material like a natural stone on them.

Yes, Signature Outdoor Kitchen offers the 24" fridge bracket kit which includes the Mounting bracket surface for the back fiber cement panel, two Stainless Steel sheets to close off the two exposed cabinet sides, the L support bracket for the countertop mounting, and the front horizontal bracket to fill the gap between the fridge and the countertop. For more details, please refer to the installation manual.

No, the Signature Outdoor Kitchen Granite countertops do not come pre-sealed.

For outdoor use, a sealed countertop is highly recommended. A sealed countertop will reduce the risk of surface stains and damage. The sealed granite will be easier to maintain as well.

Signature Outdoor Kitchen Granite countertops are easy to maintain. Using a clean damp cloth, wipe any spills as soon as possible, and avoid using abrasive scrubbing tools.

NewAge Signature Outdoor Kitchen Granite countertops are temperature resistant; this means that they can withstand the heat of pots and pans without damage. (It takes a temperature difference of 80 to 90 degree C to cause enough thermal stress to cause it to crack. If you heat a piece of granite uniformly, it will take many hundreds of degrees before any problems arise.)

Granite is a hard stone, so using a kitchen knife on the granite countertop surface is unlikely to result in scratches. While knives will not scratch the granite stone, cutting directly on the countertop is not recommended. Acidic substances found in many foods can potentially penetrate the stone and cause discoloration.

Granite is a natural stone that will fade if it is left out in direct sunlight over the course of several years. Fading in an interior setting is less common, as UV rays from indoor lights are much less corrosive than sunlight.

When this product is installed, operated, and maintained according to the instructions, NewAge will replace the defective product or parts if it fails as a result of defective materials or workmanship. This warranty is valid for 15 years from the purchase date of the product. Please read through the NewAge Warranty policy. In case of any additional questions or queries contact our Customer Service team at 1.877.306.8930.

Stainless Steel and Granite.

All standard Signature Outdoor Kitchen countertops are 25.50" deep and 1.25" thick.

There are Two different types of countertops available: 1) Standard countertops in 25.5" depth and different widths. 2) 2-Tier bar shelf countertop in 2 different widths: 54" and 72" along with 14" deep bar shelf with overall height of 42" for the ergonomic bar seating.

Yes, the Corner Countertop is available for both 90 degree and 45 degree Signature corner cabinets. The countertops are available in both Stainless Steel and Granite.

The Signature Outdoor Stainless-Steel countertops have designated screws that need to be mounted on top mounting slots of the cabinet frame, and the Signature Outdoor Granite countertops should be installed on the cabinet frames by using a silicon adhesive. For more details, please refer to the installation manual.

There are four fiber cement panel sizes 18"x34.7", 28"x34.7", 36"x34.7", and 40"x34.7". All the other panel sizes should be cut and prepared using these four panel sizes.

12mm

All different surface finishing materials such as stone, ceramic tiles, wood panels, composite wood tiles, etc. can be installed on the NewAge fiber cement panels.

Yes, Stucco can be applied on the NewAge fiber cement panels.

The fiber cement panels should be installed on the exposed sides and back faces of the cabinet set via the 1.25" screws included in the cabinet's hardware pack.

No, the pilot holes should be drilled through both the fiber cement panel and the cabinet frame using the M3.5 drill bit which is included in the cabinet's hardware pack. Please refer to the installation manual for more details.

Yes, there is a pack of two Stainless Steel trim pieces designed specifically for finishing the Signature Outdoor Kitchen fiber cement panels exposed edges. For more details, please check the installation manual.